A fun print in place fidget toy that has two 18 tooth spur gears rotating on a print in place frame.
This download includes the 2, 6, and 12 gear configurations, along with 3 different clearances for each model. I recommend testing a 2 gear configuration with the 0.3mm clearance first before printing the larger gears. If they don't spin, move up to 0.4. If those don't spin, try 0.5, but this clearance may be too big for the gears
to mesh well. The 2 gear configuration is available for FREE on my Free Stls download page.
These files are available for free for all my JBVCreative patreon members!
Recommended print settings:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18%
**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print! This download includes pre-arranged layouts for 205x205 (or larger) beds for easier printing!